Serving the Phoenix Metro Area 24/7
1940 E Camelback Rd. #201 Phoenix, AZ 85016
Panic Bars, Exit Devices & Door Closers in Phoenix, AZ
Home › Commercial › Panic Bars & Closers
Panic bar sticking? Exit device not latching? Door slamming or hanging open? We service, repair, and install exit hardware and door closers for Phoenix businesses — so people can get out fast in an emergency and the door still locks securely behind them. Mobile service, same-day when it is urgent.
Lost your only key? Fob stopped working? We come to you anywhere in the Phoenix metro, cut and program a new key on the spot, and quote a fair price on the phone that we honor at your door — 24/7.
Exit Hardware Has One Job: Out Fast, Locked Behind
A panic bar (also called a crash bar or exit device) lets anyone push the door open instantly to leave, while keeping it locked from outside. When it sticks, rattles loose, or stops latching, you have a safety problem and a security problem at the same door. We fix both.
Safety and Security Together
A working exit device protects people leaving in an emergency and keeps the door secure when it closes. We make sure it does both.
Repair or Replace, Explained
Many sticking bars and slamming closers are an adjustment or a worn part, not a full replacement. We tell you which before any work.
Common Exit Hardware and Closer Problems
The usual calls: a panic bar that sticks or will not push smoothly, an exit device that no longer latches when the door shuts, a door that slams hard, a door that stays open instead of closing, loose or rattling hardware, and a business that cannot secure the entrance at closing. Most trace back to a worn device, a failing closer, or alignment.
Fixing the Real Cause, Not the Symptom
A bar that will not latch is often an alignment or strike problem, not the bar itself. A slamming or hanging door is almost always the closer — adjustable in many cases, replaceable when worn. A sticking push bar can be wear inside the device. We diagnose which it is, then repair or replace only what needs it. [JOHNNY TO CONFIRM: whether you want any fire-code or ADA compliance language here — left out until you confirm it is accurate and supported.]
What Exit Device and Closer Work Costs
An adjustment to a closer or strike is quick and low-cost. Replacing a panic bar, exit device, or closer costs more because of the hardware. We do not replace a whole device when a repair will hold. [JOHNNY TO CONFIRM: your pricing approach for exit-hardware and closer work so real numbers can go here.]
Door Closers: Slamming or Staying Open
A door closer controls how a door shuts — firmly enough to latch, gently enough not to slam. When it fails, the door either bangs shut or drifts open and never latches. We adjust the closer’s speed and force, or replace it with a commercial-grade unit sized for the door.
Exit Hardware We Service and Install
We work on the exit hardware commercial buildings depend on — push-bar panic devices, rim and mortise exit devices, concealed vertical rod devices, and the full range of door closers, from surface-mounted to concealed. Retail, restaurants, offices, warehouses, and multi-tenant properties: if the door needs to open fast and lock securely, we handle it.
Exit hardware is part of our commercial locksmith work in Phoenix. Related: storefront lock and door hardware repair and emergency commercial lockouts.
Fast Response When It Matters
A door that will not latch or lock at closing leaves your business open overnight. We respond across the Phoenix metro to get it secure.
Clean, Professional Work
We fit and adjust exit hardware properly, then test that the door opens freely and latches every time before we leave.
Upfront Communication
You will know whether it is an adjustment, a worn part, or a full replacement — and what it costs — before we start.
Work That's Built to Last
Exit hardware gets used hard every day. We install devices and closers built for that traffic so the fix holds up.
Rated 4.9 by 760 Phoenix Customers
With a 4.9-star rating across 760+ reviews, our reputation is built on consistency, professionalism, and results. Customers trust us because we show up when we say we will, communicate clearly, and solve problems.
Panic Bar & Door Closer FAQs
Can a panic bar be repaired instead of replaced?
Often, yes. A sticking or non-latching bar is frequently an alignment or worn-part issue we can repair rather than replace. We check the device first and tell you which it needs.
Why won’t my exit device latch when the door closes?
Usually the strike is misaligned or the closer is not pulling the door fully shut, so the latch misses. We correct the alignment or adjust the closer so it catches every time.
Can you fix a door that slams shut?
Yes. A slamming door is a closer that has failed or gone out of adjustment. We tune the closing speed and force, or replace the closer with a commercial-grade unit.
Can you fix a door that won’t close all the way?
Yes. A door that drifts open and never latches is a closer or alignment problem. We adjust or replace the closer so the door shuts and latches on its own.
My panic bar sticks — what causes that?
A sticking push bar is usually wear inside the device or binding from misalignment. We open it up, find the cause, and repair or replace the mechanism.
Do you install new panic bars and exit devices?
Yes. We install new panic bars and exit devices sized for your door, so they open freely from inside and lock securely from outside.
Do you come out to the business?
Yes. We are mobile and service, repair, and install exit hardware and closers on-site anywhere in the Phoenix metro.
Can you secure my exit door the same day?
Often, yes. If it is an adjustment or common part, we can usually secure the exit door the same day. If a specific device must be ordered, we secure the opening in the meantime.
Schedule An Appointment With Johnny Locksmith
Fill out your details below with the service that you need, date and preferred hour and we’ll get back to you to book an appointment.
Not sure which service you need?
Tell me what’s happening and where you are and we’ll solve your problem quickly.
To help is serve you faster, help us identify car vs home vs business, and what kind of lock or key we’re dealing with.
If you want to contact use for any reason other than for locksmithing services, please visit our contact page by clicking the button below.
- 1940 E Camelback Rd # 201, Phoenix, AZ, 85016
- 480-779-9144
Copyright © 2026. All rights reserved.
